Removing A Dimm Card - Fujitsu Stylistic 3400 Technical Reference Manual

4. Reinstall the cover and screws that you removed in step 2.
5. Confirm that the DIMM card is recognized by the system. To do so, run BIOS Setup. The size of the
DIMM card should be displayed in the Info menu in BIOS Setup.
The DIMM card is installed in the pen tablet and you can now use the system.

Removing a DIMM Card

To remove a DIMM card,
1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu. (Do
not attempt to remove or install a DIMM card when the system is in Suspend mode or running.)
2. Remove the screws from the cover plate on the back of the pen tablet and remove the cover plate as
shown in Figure 4-2.
3. Spread the fingers on the socket that lock the DIMM card in place until the DIMM card is loose.
4. Remove the DIMM card from the socket.
5. Reinstall the cover plate if you are not installing a new DIMM card.
The DIMM card is now removed from the pen tablet. Refer to "Installing a DIMM Card" on page 36 if
you are installing a new DIMM card.
Removing a DIMM Card
4
37