Suspend Events; Off State - Fujitsu Stylistic 3400 Technical Reference Manual

Hide thumbs Also See for Stylistic 3400:

Table of Contents

completely powered down. In this state, the system consumes about the same amount of power

consumed in the Off mode. This suspend state uses the least amount of battery power.

Before you configure your system to use Save-to-Disk mode, consider the following factors:

• More time is required to suspend or resume system operation as data must be written to or read from

the hard disk drive.

• You must first create a save-to-disk file or partition before you can use Save-to-Disk mode, see

"PHDISK Hard Disk Preparation Utility" on page 27 for details. (Note that PHDISK may not be

supported for use with your operating system.)

• System operation can only be resumed if the Suspend/Resume button is pressed.

• Save-to-Disk mode cannot be used with the Resume On Modem Ring or Resume On Time BIOS

features.

Suspend Events

System operation is suspended when the Suspend Timeout occurs, the Suspend/Resume button is

pressed, or a suspend request is generated by a software application.

In the Off state, the system is fully powered off. Note, however, that some circuits connected to the

battery will continue to draw a very small amount of current when the system is off. For this reason, the

pen tablet should be stored with a fully charged battery pack if the system will not be in use for more

than a few days.

System Power

Table of Contents