Toshiba digital copiers Service Manual page 50

3
T
O PREPARE FOR INSTALLATION USING THE PARALLEL PORT
3-26
Service Procedures
1. Print the Configuration page from the Functions menu (if possible) to record the
customer's current Setup configuration (see page 2-5).
Setup defaults to its original configuration when system software is installed.
2. Print the Font List(s) from the Functions menu.
The Font List(s) details what fonts are resident on the GA-1121. Along with the fonts
that are provided on the System Software CD, the customer may have installed
additional fonts that will be deleted when system software is installed.
3. Power off the copier and the PC before attaching any cables.
4. Connect an IEEE 1284 cable to the LPT1 port on your PC (generally, a 25-pin D-type
connector) and to the 36-pin parallel connector on the GA-1121.
External connectors on the GA-1121
F 3-12
IGURE
Now you are ready to install system software.
25-pin Network LED
parallel port
10/100BaseT
network port
36-pin
parallel port