Configuration Settings - Motorola WS 2000 Configuration Manual

Configuration Settings

6
Installing a new image
The VIEW Certified firmware release can be obtained from Motorola
'Dev Zone'. Upgrading the WS 2000 Wireless Switch to the new
firmware can be done through the Web interface or through the
command line interface (CLI). Place the image on the FTP server,
TFTP server or through Compact Flash card, depending on the file
transfer mechanism chosen.
Installing firmware through the CLI
1. Enter your username and password to log into the CLI. The
defaults are user:
admin
parameters are
19200,8,n,1,n
2. Connect the FTP/TFTP server to subnet 1.
a. For TFTP, issue the following commands.
admin>
admin>system
admin(system)>config
admin(system.config)>set server 192.168.0.100
admin(system.config)>set fw file
mf_02010100009R.bin
admin(system.config)>update tftp s1
b. For FTP, issue the following commands.
admin>
admin>system
admin(system)>config
admin(system.config)>set server 192.168.0.100
admin(system.config)>set fw file
mf_02010100009R.bin
admin(system.config)>set fw path /home/<user>
admin(system.config)>set user <username>
admin(system.config)>set passwd <password>
admin(system.config)>update ftp s1
3. The WS 2000 Wireless Switch will reboot and load the firmware.
password: . The serial interface
symbol
.
PN: 1725-36066-001_D.doc
Configuration Guide