Display Added Measurement; Values; Delete Saved Measurement Values - Silvercrest KH809 Operating Instructions Manual

Operation
2) When you want to carry out and save the next measurement, press the save
button M+ 4 once again. In the display 3 the next save position (e.g. M02)
appears.
3) To make further measurements, repeat the previously described steps.
NOTICE
► You can save up to 99 measurements (M99). When the memory is
full, it no longer permits measurements to be saved. In this case, delete the
saved data: press the button MC 6 continuously until the indication M99
(or the number of the last occupied memory space) extinguishes.
► If the nutritive value upper limit is reached with a memory input, „M" blinks
in the display 3 and no further measurements can be added.
Display added measurement values
You can retrieve the added measurement values at any time, for example, daily.
1) Press the button MR
In the display 3 appears the sum sign, the number of occupied save locations
and the added-up measurement values.
2) Using the function buttons
the nutrient and energy value.
NOTICE
► When the sum of the saved energy values exceeds 199999 kJ, or another
nutritive or energy value is exceeded, the display 3 indicates E- - - - .
After about 8 seconds, if no other buttons are pressed, the scales switches back
to the weighing mode.
NOTICE
► If you press the button MR
saved, the indicator "NULL" appears in the display 3.

Delete saved measurement values

When you wish to delete the saved measurement values, press the button MC 6
continuously until the number of the last occupied memory space extinguishes.
Nutrition Scales KH 809
5.
8 (except ON/OFF TARE
5 although no measured values have been
) switch between
11
GB