Hitachi AJ-S55GZ User Manual page 16

Control Panel (continued)
Lid Lock function
The lid will be locked automatically when washing for children's safe.
Setup safe model
1
Close the Lid, press
2
Press and hold down the
3
The buzzer makes a sound of "beep" to announce the
completion of setup.
Lid Lock indicator will light.
To unlock the Lid Lock, repeat the above operations once again.
The buzzer makes a sound of "beep" to announce the
completion of remove.
Lid Lock indicator will be out.
3
Cut off the power supply.
With the set of Lid Lock function, the washing machine can't operate if the lid is opened. (The control
Attention
panel will release the alarm if the lid is opened)
)
When you want to open the lid
Press button
When beginning again
With the set of safe mode, the lid will be locked as the washing machine restarts.
Without the set of safe mode, the lid will be locked automatically during the course spinning.
Hope to switch off the buzzer beep after the completion of the washing process
Follow the below steps to switch off the buzzer beep after the completion of washing process.
Press the power button.
1
2 Press and hold down the START/PAUSE button for at least three seconds, the buzzer
beep can be switched off.
3
You can press and hold down the START/PAUSE button for at least three seconds to recover the beeping.
16
button.
button for at least three seconds.
Lock will be removed automatically after washing. Lid can be opened.
3
(