Soak Process - Hitachi AJ-S55GZ User Manual

SOAK Process

Put the laundry in and press the "POWER
SWITCH" button .
Press the "PROGRAM" button
the "SOAK" process.
With each pressing on the "PROGRAM" button, the
indicator will light or flash in sequence.
Press the "start" button
Put in the detergent according to the amount
and close the lid.
(The sound of buzzer indicates washing
completion)
Wash with special moving steeped water flow
• The pulsator to detect the amount of laundry and display on the
control panel.
• After the detergent amount and the water level are displayed,
the washing machine will pause about 1 minute for putting in
and select
the detergent.
(Press the "WATER LEVEL" button, and the washing machine
starts operation)
• After the lid is closed, the washing machine will detect at the low
water level and the required water level in order to dissolve the
.
detergent and know about the quality of laundry, then it will
decide the necessary mode of washing.
Use of detergent
• How to put detergent in
During soaking, the "WASH" LED flashes in turn to show that
it is soaking.
19
Powder synthetic detergent
Liquid detergent
20~21
20~21
19
1
29