Hitachi AJ-S55GZ User Manual page 39

In "BLANKET" process
Dismantlement of the detergent dispenser
1
1Bend the dispenser
2Dismantle the pin from the pinhole.
Pin
Pin hole
Attention
• Do not add any clothes on the washing cap after the installation of the cap.
It is prohibited to install the washing cap aslant. In addition, the washing cap is prohibited from being used in other
modes except the "BLANKET" and "SILK" process.
Prohibited
Lest the splashed water drop or the washing cap bounced out will cause body injury or damage
of the washing machine.
• When keeping the washing cap, please prevent it from deforming.
• The washing cap is a consumable good.Purchases can be made at authorized dealers.
Refer page 63 for the optional components.
63
Taking out the washing cap
Push the washing cap
1
down.
Push
Put the washing cap into the basket,
2
hold the central circle, and pull it right
beneath the balance ring.
Do not clip the clothes when installing
the washing cap.
washing cap
Attention
As shown in the figure
2
hold on to the center
part and bend it to the
arrow direction.
Bend
balance ring
central circle
Pull the washing cap
3
out.
Pull the washing
cap out
39