Sanyo DMP-P1 Instruction Manual page 10

2. The HOUR digits will flash, press TUNE/SKIP
the unit to set the HOUR, press MEMORY/ALARM SET button to
confirm the HOUR.
3. The MINUTE starts to flash, press TUNE/SKIP
set the MINUTE and press MEMORY/ALARM SET button to confirm
the MINUTE.
4. Press TUNE/SKIP
as the wake-up alarm. Press MEMORY/ALARM SET button to confirm the setting.
5. When the wake-up alarm is set to FM radio or AM radio, the radio frequency last used will
be used as the wake-up alarm radio frequency.
6. At any stage, if no key is pressed for approx. 5 seconds, the last selected value is
automatically saved.
7. If in case the iPod wake-up mode is selected and no iPod was plugged in. The buzzer will
sound instead.
8. After setting, the ALARM and the ALARM MODE ICON will appear on the display when
the alarm is turned on.
9. When the alarm time is reached, the ALARM and the ALARM MODE ICON will flash.
10. Depends on your prior selection, the radio, buzzer or the iPod will sound.
11. Press STANDYBY/ON/FUNCTION button to cancel the alarm and the ALARM and the
ALARM MODE ICON will remain on the LCD display and the alarm will sound again on the
next day at the same time.
12. Press MEMORY/ALARM SET button again to cancel the alarm setting. The ALARM and
the ALARM MODE ICON will disappear on the LCD display.
Snooze Function
Press SNOOZE/DIMMER button to silence the ALARM sound (iPod / radio / buzzer)
temporarily for approximately 9 minutes,the alarm will active again after 9 minutes lapse. The
ALARM and the ALARM MODE ICON will flash. The snooze function is repeatable for 60
minutes,. To switch it off, you can press MEMORY/ALARM SET button.
Dimmer Function
Press SNOOZE / DIMMER button once in operation mode to dim the display. Press the
SNOOZE / DIMMER button again to resume to normal brightness.
Sleep Function
This function switches the unit from operation mode to STANDBY mode after the specified
time.
or button to select one of FM Radio, AM Radio, iPod or buzz
10
or button on
or button to