Digital Zoom - GE TruVision DVR 20 User Manual

52BChapter 5: Basic operation
To assign a camera to a different channel using the front panel:
1. In live mode select a camera by clicking its cameo in a multiscreen display.
2. Push and hold the camera button that you want to switch.
The two cameos switch positions on-screen.
Sequencing live mode
The sequencing feature allows a camera to be displayed briefly on-screen before
advancing to the next camera in the sequence list. Sequencing can only be done in
full screen mode.
Each camera on the main and spot monitors can have a pre-programmed dwell time
and sequence order. See "Sequencing main and spot monitors" on page 91 for the
setup information. The default sequence list displays each camera in numerical order.
Sequencing live mode using the mouse:
1. Select the camera where you want to start sequencing.
2. Right-click the mouse. The Main toolbar appears on-screen.
3. Click the Sequence icon. The sequencing starts.
4. Press the icon again to stop the sequencing.
Sequencing live mode using the front panel:
1. Select the camera where you want to start sequencing.
2. Press the LIVE button on the front panel. The sequencing starts.
3. Press the LIVE button again to stop the sequencing.

Digital zoom

You can easily zoom in or out of a camera image using the digital zoom function. The
zoom function doubles the size of the camera image. This function is only available
from the front panel.
Note: You must be in live mode.
To quickly zoom in/out on a camera image:
1. Select the camera you wish to use.
Note: The Main toolbar must be closed.
2. Press the camera number button twice on the front panel for the selected
camera. The word "Zoom" appears on-screen.
3. Using the arrow buttons move the camera image around on-screen.
4. To exit digital zoom, press the MENU button and return to live mode.
42 TruVision DVR 20 User Manual