Copy Camera Settings - GE TruVision DVR 20 User Manual

Option
Setup
PTZ Preset
Control
4. Changes are automatically saved when you move to another screen.

Copy camera settings

The settings of one camera can be easily copied to other cameras. You can specify
which group of settings you want to copy over to another camera: the basic settings,
motion detection settings, and video adjust settings. See Figure 20 below.
The screen also shows the maximum frame rate available as well as that already
used for both A and B streams.
Figure 36: Copy camera settings screen
TruVision DVR 20 User Manual
Description
Camera: Select the camera for the PTZ setup.
Protocol: There are three protocols available: GE, Pelco D, Pelco P.
Select one.
PTZ ID: Enter the PTZ ID for this camera. There can be up to 255 PTZ
IDs.
To program a preset:
In the Set box, enter the number of a preset. Move the camera to the
desired position using the control buttons. Press the Set button to
save the movement.
To go to a preset:
In the Go To box enter the preset value required and click the Go
button. The camera moves to that preset position.
Move the camera position using the on-screen arrows and adjust the
zoom, focus ands iris of the image.
53BChapter 6: Advanced setup
71