Surround Play Using The Listen Mode - Kenwood KRF-V7300D Instruction Manual

Surround play using the listen mode

Select the listen mode according to the source being played back.
LISTEN MODE
Preparations
• Turn the components to be used ON.
• Complete <Speaker setup>.
• Select the source you wish to play back with
surround sound.
• Select the input mode r.
(When the input mode is set to "Full Auto" or
"Signal Auto" (i.e. when the "AUTO DETECT"
indicator is lit), the listen mode matching the
input signal type and speaker setups is selected
automatically. Noise may be produced when a DTS
source is played by selecting the analog input.)
1
Start playing the selected source.
2
Use [LISTEN MODE] to select the listen mode.
Each press switches the listen mode.
For the types of listen modes, see <Input signals and
corresponding listen modes> W.
LISTEN MODE
51
English