Fm/Am Tuner Control Function; Selecting The Fm Bands; Selecting The Am Band; Selecting The Seek Mode - Kenwood KVT-920DVD Instruction Manual

FM/AM Tuner Control Function

B
A C
I
J
E

Selecting the FM Bands

Touch [ FM ] to select the FM band.
Each time you touch [ FM ] , the band switches
between the FM1, FM2 and FM3.
C Selecting the MW/LM Band
Touch [ AM ] to select the MW/LW band.
F

Selecting the Seek Mode

You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
AUTO 1: Auto Seek Mode
AUTO 2: Preset Station Seek Mode
MANU: Manual Seek Mode
D

Tuning

Auto Seek Mode (AUTO1)
• Touch [ ¢ ] to seek increasing frequencies.
• Touch [ 4 ] to seek decreasing frequencies.
Preset Station Seek Mode (AUTO2)
• Touch [ ¢ ] to move to the next preset station.
• Touch [ 4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [ ¢ ] to increase the frequency by one
step.
• Touch [ 4 ] to decrease the frequency by one
step.
NOTE
The ST indicator is displayed when stereo
broadcasts are being received.
FM/AM Tuner Control Screen
D F G
E
L
K
H
AUTO 1/AUTO 2 /MANU indicator
Preset Band Preset number
LO.S indicator
K

Station Preset Memory

Store the frequency of the station currently
being listened to. You can then recall that
station with a single touch of a button.
1
Select the band/station that you want to have
stored.
2
Hold down preset station number [ 1 ] - [ 6 ]
that you want to use for the station, for two
seconds or more.
NOTE
You can store 6 stations in each of the FM1,
FM2, FM3, and AM(MW/LW) band.
A

Auto Memory Entry

You can automatically store all the receivable
frequencies in the band currently being
listened to, and then recall them with the
touch of a button later. This function is
especially useful when you are travelling and
do not know what stations are available. Up to
6 frequencies can be stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME ].
3
Touch [ 4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
When all the stations in a certain band are
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last
station received.
NOTE
• When the AF function is turned on whilst auto
memory entry takes place, only RDS stations
(i.e., stations with RDS capability) are stored.
RDS stations that have been preset for FM1
cannot also be preset in FM2 or FM3.
• When the local seek function is turned whilst
auto memory entry takes place, stations with
poor reception are not stored.
• When the Traffic Information function is on,
only the local traffic information station
frequency will be stored.
Radio-Text/Program Service name
Frequency
TI indicator
AF indicator
ST indicator
NEWS indicator
29