Quick Effect Function; Adjusting The Balance Levels; Adjusting The Fader Levels; Recalling Your Settings Of The Crossover Network/Delay - Kenwood KVT-920DVD Instruction Manual

Quick Effect Function

Quick Effect Screen
A
D
A

Adjusting the Balance Levels

• Each time you touch [
channel is emphasised.
• Each time you touch [
right channel is emphasised.

Adjusting the Fader Levels

D
• Each time you touch [
channel emphasised.
• Each time you touch [
channel emphasised.
E
Recalling Your Settings of the Crossover
Network/Delay time
<When the KDS-P900 is connected>
Touch [ 1 ] -[ 6 ] for the desired Crossover network
and delay time setting.
B

Recalling Your Sound Settings

<When the KDS-P900 is not connected>
Touch [ 1 ] -[ 5 ] for the desired sound preset
setting.
<When the KDS-P900 is connected>
Touch [ 1 ] -[ 3 ] for the desired parametric
equaliser setting.
C

External Amp Control

Adjust the bass boost level of the external
amplifier using the main unit.
Each time you touch [ Amp Ctrl ] to switch the
Bass boost level as follows
" OFF "
Bass boost level is flat.
" MODE1 "
Bass boost level is low (+6dB).
" MODE2 "
Bass boost level is high (+12dB).
NOTE
As of December 2000, the power amplifiers
controllable by the main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T
/PS301T/X201T/PS201T
B
F
E
], the sound in the left
], the sound in the
], the sound in the front
], the sound in the rear
C
F

Returning to the Source Control Screen

Touch [ RTN ] to return to the Source Control
Screen.
53