E805-0701 - Canon imagePRESS C7000VP Series Trouble Shooting Information

1.24 E805-0701

 Description
There are some reported instances from the field where the error code 'E805-0701' was
indicated during a continuous copy job because the primary fixing separating cooling fan 1 had
wire pinching.
- E805-0701 can be displayed when an error occurs with the primary fixing separating cooling
fan 1. This error code is detected when the phase unlock state is detected for 2 sec
continuously 10 sec after the fan is turned on.
 Field Remedy
1. Check the lead wire of connector on the primary fixing separating cooling fan 1 has NOT
been pinched.
4. If the lead wire has been pinched, repair it. If not, re-fit the connector.
5. If the symptom still occurs, re-fit J4372 and J4360 connectors of the primary fixing
internal driver PCB, J4080 and J4400 connectors of the fixing heater driver PCB 1, and
J1003 connector of the DC controller PCB.
6. If the symptom still occurs, replace the fan with a new one.
FK2-3148 Fan
Trouble Shooting Information for C7000VP series
Page 24
Rev. 2.0
2010/09/17