Noise Occurred At Operating The Refresh Roller -> New Item - Canon imagePRESS C7000VP Series Trouble Shooting Information

2.12 Noise occurred at operating the refresh roller -> New item
 Description
Noise occurs when driving the refresh roller.
 Cause
The screw that secures the roll retaining plate (FC7-4948-000) at the pressure assembly of the
refresh roller loosens and there generates a state of insufficient pressuring of the refresh roller
against the fixing roller; the refresh roller is driven with insufficient gear engagement for driving
the refresh roller.
 Field Remedy
Tighten the screw loosened as described above.
The roll retaining plate may have been deformed.
In this case, replace the part.
(Reference)
Change into the locking screw (FU5-9235-000) is planned.
When the parts are prepared, Service Information will be issued.
Trouble Shooting Information for C7000VP series
Page 59
Rev. 2.0
2010/09/17