Motorola AP-5181 Deployment Manual page 17

Hide thumbs Also See for AP-5181:

Deployment Guide

• The instructions provided herein are intended to provide useful installation guidance, and offer insight into best

practices. Adherence to this guide, and the instructions herein do not ensure compliance with specific or

regional electrical codes and regulations.

• In all cases, specific or regional electrical codes and regulations shall govern the installation of this product.

• Installation and maintenance of this product in compliance with specific or regional electrical codes and

regulations is the sole responsibility of the end user.

To install an AP-5181 Power Tap:

1. Remove and retain the 10 screws used to secure the Power Tap cover.

2. Remove the weather sealing cover to expose the unit's interior. Do not remove or tamper with the sealing

gasket remaining on the back housing.

3. Remove and retain the 2 terminal screws releasing the 2 solder-less ring terminals.