Motorola AP-5181 Deployment Manual page 18
Hide thumbs
Also See for AP-5181:
- Specifications manual (114 pages) ,
- Product reference manual (698 pages) ,
- Brochure (12 pages)
Advertisement
18
AP5181 Access Point
4. Remove and retain the nut with a captive locking washer. This nut releases a solder-less ring terminal.
5. Loosen the gland nut on the power entry fitting.
6. Expose 6 inches of wire from the jacket. Only use wire suited for your specific installation requirements
and application. Use 3 conductor wire of a gage suitable for the required wire run.
7. Feed the wire through the power fitting. Do not tighten the fitting at this time.
Advertisement
