Battery Replacement - Craftsman 82315 Owner's Manual

BATTERY REPLACEMENT

1. Disconnect the test leads from the meter.
2. Remove the protective rubber holster as shown in the
diagram.
3. Remove the Phillips head screw located on the lower back of
the instrument.
4. Flip up the fuse/battery compartment cover to access the
batteries.
5. Gently remove the batteries and install two new 1.5V 'AAA'
batteries observing polarity.
6. Secure the fuse/battery compartment cover.
7. Place the protective rubber holster on the meter.
WARNING: To avoid electric shock, do not operate the meter
until the batteries and the fuses are in place and fastened
securely.
1. Removable
Rubber Holster
2. Meter
3. Battery
4. Fuses
5. Compartment Cover
6. Rubber Holster
WARNING: To avoid electric shock, do not operate the meter
until the battery is in place and fastened securely.
28