Fujitsu 9373329060 Operating Manual page 6

Table of Contents

OPERATION

Room temperature sensor selection

Press the ECONOMY button for more than 2 seconds to

select whether the room temperature is detected at the in-

door unit (remote sensor) or the remote controller.

When the

thermo sensor display appears, the room

temperature is detected at the remote controller.

NOTES

• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service

personnel when using this function.

• If this function is locked, the location where the room temperature is detected cannot be changed and the

mark flashes when the ECONOMY button is pushed for 2 seconds or more.

Child lock function

En-5

Press the DAY (DAY OFF) button and SET button simulta-

neously for 2 seconds or more to activate the child lock

function and lock all buttons on the remote controller.

Press the buttons again for 2 seconds or more to deacti-

vate the child lock function.

When the child lock function is activated, the

appears. If any button is pressed during the child lock,

the

display and

mark

flash.

Indoor unit

Table of Contents