Toshiba E-studio 1105 Operating Instructions Manual page 125

• When loading paper in the multi bypass tray, the LCT or the Wide LCT, place the print side face up.
• When using the multi bypass tray, the maximum custom width differs depending on which tray is
installed:
• Large Capacity Tray (LCT): 305.0 mm (12 inches)
• Wide Large Capacity Tray (Wide LCT): 330.2 mm (13 inches)
• When using tab sheets or label paper, make sure to select the appropriate paper type under [Tray
Paper Settings]. See "Tray Paper Settings", Network and System Settings Guide
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• To print on OHP transparencies, load OHP transparencies on the multi bypass tray, press the [ ] key,
and then set [Special Paper] to [OHP (Transparency)]. For details, see "Copying from the Bypass
Tray" in Copy and Document Server Reference
Printer Reference .
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. Use A4 or 8
details, see Copy and Document Server Reference
• When you use OHP transparencies, fan them for each use.
• We recommend you load OHP transparencies and sheets of label paper and translucent paper one
by one. This prevents them becoming jammed inside the machine.
• Also, be sure to remove printed OHP transparencies and sheets of translucent paper one by one as
they are delivered. This prevents them sticking together.
• We recommend that you use a 4000ANSI lumen or brighter overhead projector to project OHP
transparencies.
• You can specify whether or not the machine auto detects multi-sheet feeds in paper from every tray.
The default setting is [On]. In the [Adjustment Settings for Operators] menu, you can also specify
whether current jobs are suspended or continued when a multi-sheet feed is detected.
• If multiple sheet feeding occurs, load sheets one by one.
• When you load label paper, set the paper direction to .
• Flatten out curled sheets before loading them.
• Before you print on coated paper or NCR paper from the Wide LCT for the first time, contact your
service representative.
• To print on coated paper from the wide large capacity tray: select System Settings, [Tray Paper
Settings], and then, for each tray's [Paper Type] be sure to set [Paper Type] to [Coated Paper], and
[Paper Thickness] to [Thick Paper 1].
• Before loading coated sheets, be sure to fan them thoroughly.
• If you load paper of the same size in two or more trays, the machine automatically shifts to the other
tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However,
if the paper type of one tray is recycled or special paper, the settings of the other trays must be the
and "Setting Paper on the Bypass Tray" in
1
/ × 11 size transparencies, and specify their size. For
2
, and Printer Reference
Recommended Paper Sizes and Types
.
.
3
123