3.
Make sure there is space between the sheets.
Loading Paper into the Multi Bypass Tray (Tray 7)
This section describes how to load paper into the multi bypass tray (Tray 7).
• Check the paper edges are aligned at the left side.
• The maximum number of sheets you can load into the multi bypass tray (Tray 7) depends on paper
type. The number should not exceed the upper limit.
• When setting tab stock, always use the back fence.
1.
Set the side fences to the paper size.
2.
Place paper in the multi bypass tray (Tray 7).
Load paper print side up.
BJU110S
BPZ027S
Loading Paper
3
93