Ip Settings - Dell PowerConnect 3048 User Manual

IP Settings

In the IP Settings page, you can manage the IP-related information about
the system. The page includes the following editable fields:
• IP Address
• Default Gateway
• Network Mask
• IP Assignment Mode — Sets whether IP functionality is enabled
through manual (static) configuration or set by Dynamic Host
Configuration Protocol (DHCP) or Boot Protocol (BootP).
– Manual — Sets static IP address.
– BootP — Gets IP address from a BootP server.
– DHCP — Gets IP address from a DHCP server.
To save any changes you make in this page for the current session, click
Apply. To reset these fields to their current value, click Reload.
For IP address changes to take effect, perform the following steps:
37
Web I n t e r f a c e