Bridge Settings
From the Bridge Settings screen, you can enable and configure the
spanning tree. The following options are available:
•
Enable — Turns the spanning tree on. If you enable the spanning tree,
you must complete the following fields:
Hello Time — The interval between configuration messages sent
–
by the spanning tree protocol.
–
Max Age — The amount of time before the system discards a
configuration message.
–
Forward Delay — The amount of time the system spends in
learning and listening states.
–
Bridge Priority — The priority setting among other switches in
the spanning tree.
•
Disable — Disables the spanning tree protocol on the system.
Console Inter f ace
93