Dell PowerConnect 3048 User Manual page 54

54 Web I n t e r f a c e
• Show VLAN — Select the VLAN for which you want to edit the
membership setting.
• Name — Define the name of the VLAN.
• VLAN ID — Enter the numeric ID of the VLAN (1 - 4094).
• Remove VLAN checkbox — Check the box to remove an existing
VLAN.
• Port Toggle Buttons — Select VLAN membership for each port by
toggling the value of the port button:
– <U>: Port is a member of the VLAN. All packets transmitted by
the port will be untagged, that is, not carry a tag and therefore not
carry VLAN or CoS information.
– <T>: Port is a member of the VLAN. All packets transmitted by
the port will be tagged, that is, carry a tag and therefore carry
VLAN or CoS information.
– <BLANK>: Port is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the port.
The VLAN tagging option is a standard set by the IEEE to facilitate the
spanning of VLANs across multiple switches. For more information, see the
"Appendix" and IEEE Std 802.1Q-1998 Virtual Bridged Local Area
Networks.
The following tasks can be completed from this page:
Add VLAN Group
Under the Show VLAN drop-down menu, select Add a new VLAN.
1
Complete the Name and VLAN ID fields.
2
Add VLAN members.
3
See the procedure
more information.
Click Apply.
4
Remove VLAN Group
Under the Show VLAN drop-down menu, select the VLAN you want
1
to remove.
Check the Remove VLAN box for the VLAN you want to remove.
2
"Add VLAN Membership" later in this section for