Toner Cartridge Installation - Sharp AR-5012 Service Manual

11) Attach Upper developer unit and fix it with a screw.
12) Rotate the MG roller gear to distribute developer evenly.
Note: Never rotate the gear in the reverse direction.
Note: When carrying Developer unit, do not tilt it extremely as
shown with the arrow in the figure below.
(Prevention of splash of developer)
13) Insert Developer unit carefully into the copier.
Note: Quick insertion may result in splash of developer. Be sure to
insert carefully.
14) Confirm that Developer unit is completely inserted to the bottom of
the machine, fix Developer unit and the machine with a screw.
15) Completion of Developer unit installation

7. Toner cartridge installation

1) To prevent against uneven distribution of toner, hold Toner unit
2) Hold the section of Toner unit shown in the figure below, remove
3) Pull out the cushion in the arrow direction.
4) Insert Toner unit carefully into the copier.
5) Insert until the hook is engaged with the copier as shown in the fig-
6) Pull out the shutter in the arrow direction.
7) Completion of Toner unit installation
AR-5012 UNPACKING AND INSTALLATION 5 - 3
with both hands and shake it several times horizontally.
the packing tape, and remove the cushion.
ure below.
Note: Do not hold and carry the shutter. Otherwise the shutter may
drop and Toner unit may drop.
Close the front and side cabinets.