Sharp AR-5012 Service Manual page 43

16) Remove each pawl, and remove the paper exit tray.
3)
17) Remove two screws and remove the fusing connector.
18) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
1)
2)
1)
4)
2)
2)
AR-5012 DISASSEMBLY AND ASSEMBLY 8 - 13
19) Remove the screw and the E-ring, and remove the PS semi-circu-
lar earth plate and the PS roller unit.
20) Remove three screws and remove the TC front paper guide.
2)
21) Remove the E-ring and remove the spring clutch from the PS roller
unit.
4) 4)
PS roller unit PS roller unit
PS semi-circular PS semi-circuler
earth plate earth plate
1) 1)
2) 2)
3) 3)
1)
5) 5)
4) 4)