Sony SRW-5000 Operation Manual page 172

Item number Item
836 SD AUDIO
OUTPUT
EXCHANGE
Sub items
SDOUT EXCG
SD OUT CH1
SD OUT CH2
SD OUT CH3
SD OUT CH4
SD OUT CH5
SD OUT CH6
SD OUT CH7
SD OUT CH8
840 AES/EBU INPUT
MODE
172
Menu List
Setting Function
Makes independent track selections for the audio (channels
1 to 8) to be multiplexed into SD SDI.
[disable] disable: Follow the settings of DIGOUT EXCHNG menu
enable
enable: Enable the settings of this menu.
[TR1]
Specifies the signal tracks to assign to audio channels 1 to
8 for multiplexing with SD SDI output.
TR12
TR1
[TR2]
TR12
TR1
[TR3]
TR12
TR1
[TR4]
TR12
TR1
[TR5]
TR12
TR1
[TR6]
TR12
TR1
[TR7]
TR12
TR1
[TR8]
TR12
[AUTO]
When recording in the HDCAM-SR format, specifies
48K VLOCK whether to pass signals input to the DIGITAL I/O (AES/
EBU) INPUT connector through the rate converter.
AUTO: Input signals pass through the rate converter. In this
48K VLOCK: Input signals do not pass through the rate
CH1 to CH8.
case, there are no limitations on input signals.
converter. In this case, input signals must be locked to
video signals at 48 kHz. Noise will occur if this
condition is not met.