Sony SRW-5000 Operation Manual page 26

2 DIGITAL I/O (input/output) section
DIGITAL I/O (AES/EBU)
INPUT
AUDIO
CH1/2 CH3/4
CH5/6 CH7/8
CH9/10 CH11/12
a HD SDI (SDI video/audio) INPUT A/B connectors
(BNC)
These accept SDI video/audio signals.
Note
The INPUT MONITOR connectors are for use with an
input monitor and does not follow the standards for output.
b FC OUT B (FORMAT CONV. OUTPUT B
(OPTION)) connectors (BNC)
These are only effective when the optional HKSR-5001
format converter board is installed. When the output
format is selected as 4:4:4, LINK B is output, and when the
output format is selected as 4:2:2 it is not output.
c HD SDI (SDI video/audio) OUTPUT connectors
(BNC)
These output three sets of SDI video/audio signals.
When the ALT/[F6] (CHARA SUPER) buttons are set to
ON in the TC menu, time data or other text data is
superimposed on the signal output from the MONITOR A
connector.
26
2-2 Connector Panel
DIGITAL I/O
OUTPUT HD SDI INPUT
AUDIO INPUT
A MONITOR
CH1/2 CH3/4
B INPUT
B(OPTION) MONITOR
CH5/6 CH7/8
HD SDI OUTPUT
1 2
A A
CH9/10 CH11/12
B(OPTION) B(OPTION)
FORMAT CONV. OUT (OPTION)
1
MONITOR
SD SDI OUT
1 2
1 HD SDI INPUT A/B connectors
FC OUT B
1
2 FC OUT B connectors
2
MONITOR
A
3 HD SDI OUTPUT connectors
B(OPTION)
2
4 FORMAT CONV. OUT (OPTION) connectors
MONITOR
5 SD SDI OUT connectors
6 DIGITAL I/O (AES/EBU) OUTPUT connectors
7 DIGITAL I/O (AES/EBU) INPUT connectors
d FORMAT CONV. OUT (OPTION) connectors
(BNC)
These output two sets of format-converted video/audio
signals.
When the ALT/[F5] (PD CHARA) buttons are set to ON in
the TC menu, the output has time data or other text
superimposed on the signal.
Note
This is only valid when the optional HKSR-5001 format
converter board is installed. When the output format is
selected as 4:4:4, LINK A is output.
e SD SDI (1/2/monitor) OUT connectors (BNC)
These output three sets of video/audio signals. When the
ALT/[F6] (CHARA SUPER) buttons are set to ON in the
TC menu, time data or other text data is superimposed on
the output from the MONITOR OUTPUT L/R connector.
f DIGITAL I/O (AES/EBU) OUTPUT connectors
(BNC)
These output digital signals in AES/EBU format for
channels 1 to 12.
g DIGITAL I/O (AES/EBU) INPUT connectors
(BNC)
These accept digital signals in AES/EBU format for
channels 1 to 12.