Copying Data Using The Front Usb Port - Fujitsu Q802 Operating Manual

Copying data using the front USB port

Data can be copied directly from an external drive to the NAS or vice versa by simply pressing the
USB Copy button on the front of the device. To use this function, follow the steps below:
► Make sure a hard disk has been installed and formatted in the NAS. This will create the usb
standard network share.
► Switch on the NAS.
► Configure the behaviour of the Copy button on the Backup - USB One Touch Copy page.
► Connect the USB drive, e.g. digital camera or flash drive, to the front USB port on the NAS.
► Press the Copy button. Data will be copied to the NAS according to the previously defined
settings.
Q802
1 = Copy button
2 = USB 2.0
Fujitsu
POWER
1
COPY
2
Copying data using the front USB port
ENTER
SELECT
STATUS LAN USB eSATA
37