Failure Or Malfunction Of A Hard Disk; Power Failure Or Abnormal Shutdown; Abnormal System Software Behaviour; System Temperature Protection - Fujitsu Q802 Operating Manual

Failure or malfunction of a hard disk

Please proceed as follows if a hard disk malfunctions or fails:
► Make a note of all unexpected behaviour and/or error messages to assist the technician.
► Stop using the NAS for any purpose and switch it off.
► Contact technical support.
The NAS must be repaired by a trained technician. Never try to repair the NAS yourself.
i

Power failure or abnormal shutdown

Following a power failure or improper shutdown of the NAS, when the system is restarted it should
normally restore to the same state it was in before the shutdown or power failure. If the system does
not function properly after the restart, please carry out the following steps:
► If the system configuration is lost due to the shut down or power failure, then reconfigure the
system manually.
► In the event of abnormal operation of the system, or if error messages are displayed, contact
customer services for technical support.

Abnormal system software behaviour

If the system software does not operate correctly, the NAS will automatically restart to restore normal
operation. If the system restarts continuously, it may fail to resume normal operation. Please contact
technical support immediately in such cases.

System temperature protection

When the system temperature exceeds 70 °C (158 °F), the system will shut down automatically to
protect the hardware.
Fujitsu
NAS maintenance
53