Table of Contents
Advertisement
23
Option 26: Fail to Communicate (Default = on)
Determines whether the panel and interior sirens sound trouble beeps if it is unable to success-
fully send a report to a central station (on), or not (off).
¾
To turn on Fail to Communicate, press:
Add—Option #—26—DONE.
¾
To turn off Fail to Communicate, press:
Delete—Option #—26—DONE.
Option 27: Ring/Hang/Ring (Default = 1)
Determines when the panel answers a remote phone access or Toolbox call. Depending on
whether an answering machine exists at the panel location, off-site access to the panel can be
done with a series of phone calls or just one.
The following table shows the available settings.
Setting
1
2
3
4
5
6
7
Off
For off-site access where an answering machine does not exist, the user or ToolBox operator
simply calls the panel location once and listens for 10 rings. The panel should answer after the
tenth ring.
For off-site access where an answering machine exists, the user or ToolBox operator must per-
form the following steps:
1. Call the panel location.
2. Let the phone ring once, then hang up.
3. Wait at least 10 seconds but not more than 40, then call the panel location again. The panel
should answer on the first ring.
If set to 1 or 5, perform steps 1 - 3 once.
If set to 2 or 6, perform steps 1 - 3 twice.
If set to 3 or 7, perform steps 1 - 3 three times.
¾
To turn on Ring/Hang/Ring, press:
Add—Option #—27—1, 2, 3, 4, 5, 6 or 7—DONE.
¾
To turn off Ring/Hang/Ring (disable remote access), press:
Delete—Option #—27—DONE.
Option 28: No Delay from Keychain Touchpad (Default = off)
Determines whether a keychain touchpad arms the system with no delay (on) or not (off).
Ring/Hang/Ring Settings
Control Panel answers after:
ring/hang/ring or 10 rings
ring/hang/ring/hang/ring or 10 rings
ring/hang/ring/hang/ring/hang/ring or 10
rings
10 rings
ring/hang/ring
ring/hang/ring/hang/ring
ring/hang/ring/hang/ring/hang/ring
Disabled—no remote (off-site) access
Euro Simon Security System
Advertisement
Table of Contents
