Date/Time - D-Link DKVM-IP1 User Manual

Passthrough access to serial port 1 via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and
access it (assuming it provides terminal support) via Telnet. Select the appropriate
options for the serial port and use the Telnet Console, or a standard Telnet client to
connect to the DKVM-IP1.
Serial Port Log
"Key Word 1": The Serial Port Log function is used for console server applications. The
data received from the selected serial port can be buffered in the DKVM-IP1's memory or
in an NFS server. The user can also define Key Words for that serial port, which will then
trigger email notifications or SNMP traps that will be sent to an administrator if the
keyword is found in the logged data.
The way in which the device deals with a detected keyword can be configured in the
"Event Log" section on page 104.
4.5.6

Date/Time

Above: Click Device Settings > Date/Time to open this configuration screen.
On this screen, the internal clock of the DKVM-IP1 can be set. You can adjust the clock
manually, or use an NTP time server. Without a time server, the time setting will lost if the
DKVM-IP1 loses power for more than a few minutes. To avoid this, you can use an NTP time
server, which sets the internal clock automatically according to the current UTC time.
102