D-Link DKVM-IP1 User Manual page 45

Above: The Host Console's Video Settings Panel (Options > Video Settings)
Brightness - Controls the brightness of the picture.
Contrast Red/Green/Blue - Controls the contrast of the relevant color channel.
Clock - Defines the horizontal frequency for the video mode. Different video card types
may require different values here. The default settings in conjunction with the auto
adjustment procedure should be adequate for most configurations. If the picture quality
still has problems after auto adjustment, you can try adjusting this setting together and
the Phase setting, as mentioned below.
Phase - Defines the phase for video sampling. This is used with the above-mentioned Clock
setting to control the display quality.
Horizontal Offset – Defines the horizontal positioning of the video.
Vertical Offset – Defines the vertical positioning of the video.
Reset this Mode - Resets video mode-specific settings (Clock, Phase, and Position) to the
factory defaults.
Reset all Modes - Resets all settings to the factory defaults.
Save changes - Saves any changes made to the video settings.
Undo Changes - Undoes any changes you made to the video settings.
44