Scheduler Association Settings; Figure 20 - Scheduler Configuration (Modify Rule); Figure 21 - Scheduler Association Settings - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
Click Apply to save the new configuration settings.
Note: After making any modifications, you must click Apply to apply the changes and to save the
settings.

Scheduler Association Settings

For a Scheduler profile to take effect, you must associate it with at least one radio or VAP interface. To associate the
Scheduler profiles, select the Scheduler Association tab in the Manage section. By default, there are no Scheduler
profiles created, so no profile is associated to any radio or VAP. The Scheduler profile needs to be explicitly associated
to a radio or VAP configuration. Only one Scheduler profile can be associated to any radio or VAP configuration;
however, a single profile can be associated to multiple radios or VAPs. If the Scheduler profile associated with a VAP
or radio is deleted, then the associated profile to the VAP or radio is removed implicitly. If the radio is operationally
disabled, then all the VAPs associated to that radio are also operationally disabled irrespective of the VAP
configuration.
January 2015

Figure 20 - Scheduler Configuration (Modify Rule)

Figure 21 - Scheduler Association Settings

Section 4 - Managing the Access Point
Unified Access Point Administrator's Guide
Page 46