Enabling The Time Settings (Ntp); Table 41 - Email Alert Configuration - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
Field
Non Urgent Severity Configures the severity level for log messages that are considered to be non-urgent.
Email Alert Mail Server Configuration
Mail Server Address Specify the IP address or hostname of the SMTP server on the network.
Mail Server Security Specify whether to use SMTP over SSL (TLSv1) or no security (Open) for authentication
Mail Server Port
Username
Password
Email Alert Message Configuration
To Address 1
To Address 2
To Address 3
Email Subject
Note: After you configure the Email Alert settings, click Apply to apply the changes and to save
the settings.
To validate the configured email server credentials, click Test Mail. You can send a test email once the email server
details are configured.
The following text shows an example of an email alert sent from the AP to the network administrator:
From: AP-192.168.2.10@mailserver.com
Sent: Wednesday, July 08, 2011 11:16 AM
To: administrator@mailserver.com
Subject: log message from AP
TIME Priority
Jul 8 03:48:25 info
Jul 8 03:48:26 info

Enabling the Time Settings (NTP)

Use the Time Settings page to specify the Network Time Protocol (NTP) server to use to provide time and date
information to the AP or to configure the time and date information manually.
NTP is an Internet standard protocol that synchronizes computer clock times on your network. NTP servers transmit
Coordinated Universal Time (UTC, also known as Greenwich Mean Time) to their client systems. NTP sends periodic
time requests to servers, using the returned time stamp to adjust its clock. The timestamp is used to indicate the date
and time of each event in log messages.
See http://www.ntp.org for more information about NTP.
January 2015
Description
Messages in this category are collected and sent in a digest form at the time interval
specified by the Log Duration field. The security level you select and all levels up to, but not
including the lowest Urgent level are considered non-urgent. Messages below the security
level you specify are not sent via email.
See the Urgent Message field description for information about the security levels.
with the mail server. The default is Open.
Configures the TCP port number for SMTP. The range is a valid port number from 0 to
65535. The default is 25, which is the standard port for SMTP.
Specify the username to use when authentication with the mail server is required. The
username is a 64-byte character string with all printable characters. The default is admin.
Specify the password associated with the username configured in the previous field.
Configure the first email address to which alert messages are sent. The address must be a
valid email address. By default, no address is configured.
Optionally, configure the second email address to which alert messages are sent. The
address must be a valid email address. By default, no address is configured.
Optionally, configure the third email address to which alert messages are sent. The address
must be a valid email address. By default, no address is configured.
Specify the text to be displayed in the subject of the email alert message. The subject can
contain up to 255 alphanumeric characters. The default is Log message from AP.

Table 41 - Email Alert Configuration

Process Id
login[1457]
mini_http-ssl[1175]
Section 5 - Configuring Access Point Services
Message
root login on 'ttyp0'
Max concurrent connections of 20 reached
Unified Access Point Administrator's Guide
Page 73