Rear Panel; Led Indicators - D-Link 2×1000BASE-T User Manual

Rear Panel

The rear panel of the Switch consists of an AC power connector. The
following shows the rear panel of the Switch.
♦ AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male into a
power outlet. Supported input voltages range from 100 - 240
VAC at 50-60 Hz.

LED Indicators

The LED indicators of the Switch include Power, SPEED, LINK/ACT
and FDX/COL. The following shows the LED indicators for the Switch
along with an explanation of each indicator.
Figure 3-2. Rear panel view
16