Table of Contents
Advertisement
Configuration
3.6 Setting of User Connection
3.6.1 List of Setting Items
List of setting items
Setting item
Operation Mode Setting
Specifying use of
connection
MEWTOCOL
communication type
MEWTOCOL-DAT
MEWTOCOL-COM
is selected
When selecting
general-purpose
communication
Open method
(server/client)
Open method
(auto/manual)
Communication method
Source node port No.
Partner node port No.
Unused connection closing time
Partner node - Setting method
Partner node IP address and
name
KEY POINTS
•
Select a desired operation mode.
•
When client settings are used, select "Use in the connection settings" only
for the connection to be used. When "Use in the connection settings" is
selected, and if connection is failed, it is regarded as a communication error.
3-10
Default
MEWTOCOL-COM
Not use
Conditions to be selected vary by the selected operation mode.
Not connect to FP2
ET-LAN
Attach a dedicated
header
Client connection
Auto OPEN
TCP/IP
0
0
0
Specification using IP
address (IPv4)
0.0.0.0
Setting method
Select an operating mode (MEWTOCOL-COM /
MEWTOCOL-COM7 / MODBUS-TCP /
MEWTOCOL-DAT / general-purpose
communication).
Specify whether each connection is to be used.
Not connect to FP2 ET-LAN / Connect to FP2 ET-
LAN
When communication is to be performed with the
FP2 ET-LAN unit, select " Connect to FP2 ET-
LAN".
Attach / Do not attach a dedicated header
When communication is to be performed with the
FP2 ET-LAN unit, select "Do not attach a dedicated
header".
Select connection function settings (server
connection (unspecified partner) / server
connection (specified partner) / client connection).
Select the connection open method (auto/manual).
Select "Auto OPEN".
Select the communication protocol (TCP IP / UDP
IP).
Specify the source node (sender) port number.
Specify the partner node (receiver) port number.
Input the no-connection communication monitoring
time. Connection is automatically cut off when no-
connection communication exceeds the specified
time.
Select the setting for partner node (IP address /
host name).
Specify the setting for partner node (IP address /
host name).
Advertisement
Table of Contents
