General-Purpose Communication
7.3.2 Contents of Received Data
When data are copied into a given data register , based on GPRECV command, the data are
saved in the following manner.
Saving method for received data
When data are saved in a given data register from the reception buffer, based on GPRECV
command, the data are saved in the following manner.
U6
DT200
H32(2)
DT201
H34 (5)
DT202
H0D (
)
DT203
C
R
DT204
-----
-----
-----
KEY POINTS
•
When a start code and an end code are included in accordance with the
communication format of an external device, they are saved as a part of
received data in the operation memory. As necessary, insert a program for
extracting the relevant data.
7-10
Saves the received No. of bytes.
H31 (1)
The received data are saved in ascending order from
H33 (3)
lower bytes.
H35 (4)
If the received No. of bytes is smaller than the area
-----
specified by the GPRECV command, the data are not
overwritten.
-----