Changing The Thumbnail Display - Panasonic AJ-PG50 Operating Instructions Manual

White indicates that the wireless LAN is in an
unconnected state.
(White)
Yellow indicates that the wireless LAN is in
operation.
(Yellow)
Red indicates that there is an error in the
wireless LAN connection state.
(Red)
Gray indicates that the 4G/LTE USB modem
is not working properly.
(Gray)
White indicates that the 4G/LTE USB modem
is in an unconnected state.
(White)
Yellow indicates that the 4G/LTE USB
modem is in a connected state. The signal
strength is indicted by yellow bars.
(Yellow)
Red indicates that there is an error with the
4G/LTE USB modem connection.
(Red)
17.
Status message
Displays a message indicating the processing status. For
example, the "UPDATING" text message and a rotating
icon are displayed during screen updating.
18.
Simple property indication
Displays the properties of the clip at the cursor position.
This is displayed when the "THUMBNAIL SIZE" (➝ page
88) menu item is set to "SMALL."
You can select the information to display from the menu.
(➝ "Setting the items to display as properties" page 41)
Note:
When there are more characters than can be displayed, only
the range of characters that can be displayed are shown.
19.
Thumbnail scroll bar
Indicates the location of the currently displayed thumbnail
among all of the thumbnails.
20.
Unplayable indicator
Indicates a clip that cannot be played because, for exam-
ple, the frequency differs from that of the system.
21.
Battery level indicator
The icon is displayed when the unit is powered by the
battery, and the
ing the AC adaptor.
The indicator changes in the order of
➝ ➝ ➝
When there is no battery power remaining,
flashes.
40
Main Mode: Thumbnail Screen
is displayed when it is powered us-
➝
as the battery level decreases.

Changing the Thumbnail Display

The thumbnail screen can be customized according to the op-
erating conditions to improve efficiency.
Example:
• Set the settings of the "THUMBNAIL SETUP" (➝ page 88)
menu item as shown below.
Set "INDICATOR" to "ALL HIDE"
Set "DATA DISPLAY" to "CLIP NAME"
Set "THUMBNAIL SIZE" to "LARGE"
• Set the "REPOSITION" (➝ page 86) menu item to "SELECT-
ED CLIPS".
Thumbnail screen display example
Note:
The thumbnail output destinations can be switched in the "GUI
OUTPUT" menu item (➝ page 100).
Setting the thumbnails to display
1
Use the cursor buttons to align the cursor with the
type of clips you want to display in the "REPOSI-
TION" (➝ page 86) menu item.
2
Press the [SET] button.
Setting the thumbnail size
1
Use the cursor buttons to align the cursor with the
size of thumbnails you want to display in the
"THUMBNAIL SIZE" (➝ page 88) menu item.
2
Press the [SET] button.
➝
( )