Panasonic AJ-PG50 Operating Instructions Manual page 98

NETWORK
I/F SETUP > NETWORK
Item
Selects network connection method.
WLAN: Connects via a wireless LAN.
4G/LTE: Connects via 3G/4G/LTE.
LAN: Connects via the LAN connector on the unit.
NETWORK SEL
OFF: Does not use the network.
Note:
For details on a network connection, refer to "Network Connection" (➝ page 61).
NETWORK FUNC
Sets the HTTP server function.
BROWSE: Enables the P2 Browser function.
HTTP SERVER BROWSE (+CTRL): Enables the HTTP server function, starting and stopping recording from
a terminal, and time code and user bit preset control.
DISABLE: Disables the HTTP server function.
USER
Sets the user account name.
ACCOUNT
Displays the set account names. Also allows you to register a new account, delete an ac-
ACCOUNT LIST
count, or change a password.
CLIENT SERVICE
FTP SERVER
Sets the name or address of the connection destination server.
URL
LOGIN USER Sets the user ID for the connection.
LOGIN PASS-
Sets the password for the connection.
WORD
Set this for transferring files using SSH.
SSH ENABLE: Uses SSH.
DISABLE: Does not use SSH.
Sets the network port number for using SSH. Set this to the same number as on the server
side.
SSH PORT
Initial setting: 22
The setting value is not displayed due to security purposes.
LAN PROPERTY
MAC ADDRESS Displays the MAC address of the LAN connector of the unit. (This cannot be changed.)
Automatically sets the network settings by DHCP.
ENABLE: Uses DHCP (automatic assignment)
DISABLE: Enter the settings without using DHCP (automatic assignment).
When "DISABLE" is selected, the following menu items are displayed. Set the items.
IP ADDRESS: Sets the IP address.
DHCP
SUBNET MASK: Sets the subnet mask.
DEFAULT GATEWAY: Sets the default gateway address.
PRIMARY DNS: Sets the address of the primary DNS server.
DHCP SERVER: Sets whether to use the DHCP SERVER function when connecting via a
wired LAN.
SECONDARY DNS: Sets the address of the secondary DNS server.
WIRELESS PROPERTY
MAC ADDRESS Displays the MAC address of the wireless LAN of the unit. (This cannot be changed.)
Selects the connection method.
DIRECT: Enables direct access to the network functions of the unit from a smartphone, tab-
TYPE
let, or computer.
INFRA: Connects with a wireless access point.
Sets the SSID setting method.
SSID INPUT
SELECT: Select from an access point list.
TYPE
MANUAL: Enter manually
98
Setup Menu: Menu List
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz