Panasonic AJ-PG50 Operating Instructions Manual page 91

REC/PB SETUP
REC/PB > REC/PB SETUP
Item
Selects the slots for recording.
microP2: Uses the microP2 memory card slots (card slots 1 and 2).
P2: Uses the P2 memory card slot (card slot 3).
REC MEDIA
Note:
Recording is not possible for a slot that is not selected but playback is possible. The slot
indication is the same as that of a card for which recording is prohibited.
Selects whether to split the recording file every 4 GB or record one file when recording to a
microP2 memory card (over 32 GB) in the AVC-LongG format.
ONE FILE: Records to one file.
SPLIT: Splits the clip every 4 GB.
FILE SPLIT
Note:
If you select "ONE FILE," that clip will not be able to be copied to a P2 memory card or a
32 GB microP2 memory card or copied or exported to a storage device.
Selects whether to record a closed caption signal superimposed on the SD SDI input signal.
CC REC ON: Records a closed caption signal superimposed on an input signal.
OFF: Does not record a closed caption signal. The EE output is also blanked.
Turns on or off closed caption signals in the first field output from the SD SDI during play-
back.
CC(F1) BLANK
BLANK: Forcibly blanks signals.
THROUGH: Does not blank signals.
Turns on or off closed caption signals in the second field output from the SD SDI during play-
back.
CC(F2) BLANK
BLANK: Forcibly blanks signals.
THROUGH: Does not blank signals.
Sets the maximum speed for the shuttle operation.
X8: 8 x normal speed
X16: 16 x normal speed
SHUTTLE MAX
X32: 32 x normal speed
X60: 60 x normal speed
X100: 100 x normal speed
Sets the maximum speed for the FF and REW operation.
X32: 32 x normal speed
FF.REW MAX X60: 60 x normal speed
X100: 100 x normal speed
SEEK: Seeks (moves to) the beginning of the clip
Sets the positions to which to move with the seek (movement) operations performed by
pressing the [NEXT] button and [PREV] button.
SEEK POS SEL
CLIP: Beginning of the clip
CLIP&TEXT MEMO: Beginning of the clip or the setting point of a text memo
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz
59.94Hz
59.94Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
91
Setup Menu: Menu List