Panasonic AJ-PG50 Operating Instructions Manual page 93

Memory card portable recorder
Hide thumbs Also See for AJ-PG50:
Table of Contents

Advertisement

REC/PB > TC/UB/CTL (Continued)
Item
Sets the time code to use when an external time code is used.
EXT LTC: LTC of TIME CODE IN connector.
S/H LTC: LTC information added to the signals input to the SDI IN connector or HDMI IN con-
nector.
S/H VITC: VITC information added to the signals input to the SDI IN connector or HDMI IN
EXT TC SEL
connector.
Note:
When "S/H LTC" or "S/H VITC" is set and "SD SDI" is selected as the input video signal,
the VITC of the input video signal is used.
Sets the drop frame mode or non-drop frame mode for CTL and TCG.
DF MODE
DF: Uses drop frame mode.
NDF: Uses non-drop frame mode.
Selects whether to output VITC signals at the positions specified in the "VITC POS-1" and
"VITC POS-2" menu items during playback.
BLANK: Does not output a VITC signal.
THROUGH: Outputs VITC signals.
VITC BLANK
Note:
• This setting is enabled only during SD SDI output.
• In EE mode, the VITC signal superimposed on the input signal is output as is.
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10 to LINE 16 to LINE 20
• When set to 50 Hz:
LINE 7 to LINE 11 to LINE 22
VITC POS-1
Note:
• The same line as the "VITC POS-2" menu item cannot be selected.
• This setting is enabled only during SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10 to LINE 18 to LINE 20
• When set to 50 Hz:
LINE 7 to LINE 13 to LINE 22
VITC POS-2
Note:
• The same line as the "VITC POS-1" menu item cannot be selected.
• This setting is enabled only during SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
Selects whether to superimpose the LTC information on HD SDI output.
HD EMBD LTC
ON: Superimposes LTC.
OFF: Does not superimpose LTC.
Selects whether to superimpose the VITC information on HD SDI output.
HD EMBD VITC
ON: Superimposes VITC.
OFF: Does not superimpose VITC.
Settings and brief function description
FREQ indications
59.94Hz
50Hz
59.94Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
93
Setup Menu: Menu List

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents