Wake-up Call
The system automatically sends ring signal to a station which registers a wake-up time. There are
two kinds of wake-up call, one is effective for one-day, the other is effective until canceled.
Button
To register wake-up time,
Press TRANS/PGM button.
Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.
(HH = 00~23, MM = 00~59)
Press HOLD/SAVE button for "one-day" or dial # and
HOLD/SAVE button for "until canceled".
(Confirmation tone is heard.)
System Phone Book
Press SPEED button twice.
On the display, you will see the following.
ICM : 1 U_SPD : 2 S_SPD : 3
Select desired type.
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will see the following.
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Pressing VOLUME button, the cursor will be moved to the next
name. When the cursor points a name or a dial number to call,
press HOLD/SAVE button. Then, the stored number is dialed.
You may enter characters using the code in "Storing Dial by
Name". The LCD will display the first two names which match
your input. (You may delete the last letter of your input by
pressing CALLBK button. And then, the previous matched
name is displayed.)
You can see the matched phone number by pressing FLASH
button while the name is displayed (toggle).
Procedures
DIAL BY NAME
19
Range