Two-way Recording
While a CO line call, you can record the conversation and it will be saved in its own mailbox.
Button
To record the conversation,
Press the programmed {RECORD} button.
To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] +
To finish the recording,
Press the programmed {RECORD} button again. Or, replace
the handset.
Alarm Reset
Button
To terminate alarm signal while idle state,
Dial 5 6 5
Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.
Flexible Button Programming
Button
To program flexible buttons,
Press TRANS/PGM button.
Press a flexible button to program.
See the below table and enter the desired code. (See Page 26)
Press HOLD/SAVE button.
To erase a flexible button,
Press TRANS/PGM button.
Press the flexible button to be erased.
Press HOLD/SAVE button.
Procedures
5
4+ [HOLD/SAVE]
Procedures
Procedures
24
Range
Range
Range