2-14
AP-7131 Access Point Product Reference Guide
8. Rotate the AP-7131 chassis 45 degrees clockwise.
9. Push the back of the AP-7131 chassis on to the bottom of the ceiling T-bar.
CAUTION Ensure the safety wire and cabling used in the T-Bar AP-7131
!
10. Rotate the AP-7131 chassis 45 degrees counter-clockwise. The clips click as they fasten to
the T-bar.
11. The AP-7131 is ready to configure. For information on an AP-7131 default configuration, see
Getting Started on page
System Configuration on page
2.7.3 Above the Ceiling (Plenum) Installations
An AP-7131 above the ceiling installation requires placing the AP-7131 above a suspended ceiling
and installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of
installation is securely fastened to the building structure in order to
provide a safe operating environment.
3-1. For specific details on AP-7131 system configurations, see
4-1.