Table of Contents
Advertisement
Available languages
Available languages
GB
5 Memory / 6 Miscellaneous
5.2 Deleting memory
If you are in memory recall mode (check chapter 5.1 Displaying
stored results), press and hold the MEM-button
seconds to delete the values stored under this memory slot. "dEL"
will be shown and an acoustic signal will be emitted for confirmation.
Press and hold the MEM-button
1
button
selected user memory. "CLr" is shown and 3 beeps will be emitted
for confirmation.
Press Start
6 Miscellaneous
6.1 Integration in VitaDock
The MEDISANA CardioCompact Blood pressure monitor fea-
tures an intgration option for transferring your measured values
through the mini-USB cable to the VitaDock app resp. online.
Therefore you need the VitaDock software for your computer.
Download the software from www.medisana.com/software as follows:
1. Go to www.medisana.com/software
2. Select "CardioCompact" as your device
3. Download and install the VitaDock software on your computer
4. You will find a detailed instruction on the website, how to install
and use the software.
6.2 Troubleshooting
• The battery change symbol "
The batteries are too low or empty. Replace all four batteries with
new batteries of type AAA, 1.5V.
• Unusual measurement results or "SYS HI", "SYS LO", "dlA Hi"
or "dIA Lo" are displayed:
Fit the cuff correctly and assume the correct position. Keep still
during the measurement. This blood pressure monitor is not
suitable for persons with a strong arrhythmia.
36
for at least 3 seconds to delete ALL values stored in the
6
7
or MEM
7
together with the SNOOZE-
to return to standby mode.
®
online
r
"
appears in the display:
7
for at least 3
Advertisement
Table of Contents
