Mitsubishi Electric GOT2000 Series User Manual page 142

Step 4.
Push and close the battery cover until it clicks.
■2. Removing the battery from GT2708, GT2705, or GT2508
The following shows the battery removal procedure, taking GT2708 as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
The battery is stored inside the SD card cover on the side of the GOT.
Open the SD card cover as shown in the following figure.
Step 3.
After removing the battery from the battery holder of the GOT, unplug the battery connector from the GOT
connector.
6 - 28
6.7 Installing and Removing the Battery
Battery
Connector
Connector
Battery
Battery cover
SD card cover
SD card cover
Black cable
Red cable