Hitachi AJ-S55KXP User Manual page 12

Installation Guide (continued)
1
Confirm the diameter of the water tap.
If the diameter exceeds 2cm, remove
the joint ring.
3
Press the sealed pad evenly against the
tap and tighten the four screws in a uniform
fashion.
For water supply hose installation, please refer to "How to install the water supply hose" in the user manual.
Loosening may occur with extended use. In such case, reinstall the joint following steps 2 to 4.
(Carry out the same steps when reinstalling the one touch joint at a change of residence, etc.)
(
Appropriate water tap
Horizontal tap A Horizontal tap B
A B
12
How to Install the One Touch Joint
2cm
4
2 ~ 4
Horizontal taps A and B as shown below.
A B
Square mouth tap
2
Check the distance between
joints A and B.
A B
Screw joint B in the arrow direction to
adjust the gap.
4
Tighten joint B in the arrow direction
to reduce the gap between joint A
and B to 4mm or less.
4mm
)
Universal household tap
B
B A B
Swivel tap