Hitachi AJ-S55KXP User Manual page 18

Control Panel (continued)
Lid Lock function
The lid will be locked automatically when washing for children's safe.
With the set of Lid Lock function, the washing machine can't operate if the lid is opened. (The control panel
Attention
will release the alarm if the lid is opened)
)
Factory initial state for "safe mode".
Remove safe mode
1
Press POWER ON/OFF button
/
2
Press and hold down the WASH button
be removed.
Press and hold down the "WASH" button
3
Cut off the power supply.
When you want to open the lid
Press "START/PAUSE" button
opened.
/
When beginning again
With the set of safe mode, the lid will be locked as the washing machine restarts.
Without the set of safe mode, the lid will be locked automatically during the course spinning.
Hope to switch off the buzzer beep after the completion of the washing process
Follow the below steps to switch off the buzzer beep after the completion of washing process.
Press the power button.
1
2 Press and hold down the "START/PAUSE" button for at least three seconds, the buzzer
beep can be switched off.
/
You can press and hold down the "START/PAUSE" button for at least three seconds to recover the beeping.
18
.
for at least three seconds, then the safe mode can
3
for at least three seconds again to set the safe mode.
3
Lock will be removed automatically after washing. Lid can be
3
/ 3
(